tricity bendix oven

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › tricity bendix oven

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 18, 2010 at 5:01 pm #51728
    AASWALES
    Participant

    hi tricity bendix tiara sb200/3 the fault is not heating well kinda not heating ????? i have replaced the thermostat both elements are ok when im at the house the oven heats up and the thermostat clicks off then comes on again ok but when im not there the customers says she puts it on an hour later opens it up and the oven is only warm ????????????

    any ideas please

    thanks alan

    January 18, 2010 at 5:27 pm #309111
    Phidom
    Participant

    Re: tricity bendix oven

    You could check the voltage at the elements in case there is a high resistance somewhere between the consumer unit and the elements. I once went to a luke warm electric shower and measured 180 volts at the element.

    January 18, 2010 at 5:52 pm #309112
    AASWALES
    Participant

    Re: tricity bendix oven

    thanks for your reply im going back tom so ill have a look and post my findings cheers alan

    January 18, 2010 at 8:31 pm #309113
    gandh1
    Participant

    Re: tricity bendix oven

    elements for these are ridiculously cheap anyway. connects pattern ones tend to be identical to originals 🙂

    January 18, 2010 at 9:39 pm #309114
    Steven
    Participant

    Re: tricity bendix oven

    Have you checked the thermal cutout ?

    Steven

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.