Creda Europa 48105 door catch

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Creda Europa 48105 door catch

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 20, 2010 at 2:35 pm #51802
    haggisandneeps
    Participant

    Would like some info on how to dismantle the door of my Creda Europa 48105 double oven (i.e. the door of the main oven) in order to replace the door catch. Does the door need to be removed entirely from the oven (if so how) or can it be partially dismantled to gain access (again if so how)? Thanks.

    January 21, 2010 at 12:58 am #309392
    Penguin45
    Participant

    Re: Creda Europa 48105 door catch

    Slacken, but do not release, the two screws for the top hinge. You should be able to lift it and release the door. The inner and outer door are held by four screws, two at the top and two at the bottom of the door, IIRC.

    Penguin45.

    April 7, 2013 at 6:48 pm #309393
    spike86
    Participant

    Re: Creda Europa 48105 door catch

    Hi
    I had the same task to do, replace a broken door catch on the same oven, Creda Europa 48105. But unfortunately I have completely released the top two screws on the top hinge. How do I now proceed to reattach the top hinge? Any help/advice would be more than welcome.
    Many thanks in advance.

    Spike86

    April 7, 2013 at 9:27 pm #309394
    iadom
    Moderator

    Re: Creda Europa 48105 door catch

    Take the side panel off.


    Sent from my iPad using Tapatalk HD

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.