Hotpoint WMA Carbon Brushes

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Hotpoint WMA Carbon Brushes

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • March 9, 2004 at 5:30 pm #5202
    13amp
    Participant

    Hi

    Got a Hotpoint WMT03P and the brushes are worn. Now I am not sure what make motor it is (looks like a Bosch type sort of?) but the carbons slot in place like bosch ones do but they have got spade terminal type ‘wings’.

    Can anyone help me with the part number?

    13

    March 9, 2004 at 6:21 pm #109582
    Dave_Conway
    Participant

    Re: Hotpoint WMA Carbon Brushes

    Hi 13

    No problem the part number is 1603910 for the FHP motor, which will soon become the norm as GDA are stopping the supply of the old motors and armatures soon I am led to believe. They also fit some of the Zanussi motors, but a bit cheaper. There is also a pattern “insert” available from Connect, part number CBN9121.

    Regards.

    Dave.

    And welcome to the site by the way.

    March 9, 2004 at 7:40 pm #109583
    13amp
    Participant

    Re: Hotpoint WMA Carbon Brushes

    Thanks for the greetings Dave!

    actually I have checked your connect no. on their site and that is the AEG type that includes the black holders.(not what I have here) These are more like Bosch brushes with tails that slot into the end of the holder?

    13

    March 9, 2004 at 7:51 pm #109584
    Penguin45
    Participant

    Hi 13,
    Try 12 AG 03 from Europart Maddocks.It’s worth it just for Peggy’s mellifluous Welsh accent.
    Tel: 01443 842371.
    Regards,
    Penguin.

    March 9, 2004 at 10:17 pm #109585
    eastlmark
    Moderator

    Re: Hotpoint WMA Carbon Brushes

    We have come across 3 differrent motors fitted to Hotpoint Wma’s. The FHP ones (like aeg but with the tag facing the opposite way like the late AEG rahter than the early AEG L & R types, Siemens ones which I think is what you have here, I do have the part number at work but not right now, I will post tommorow if no one else has. I cannot remember the 3rd one but there is definatly one out there. With merloni now involved who knows, maybe soon we will be having check the colour of the writing on the label.

    March 10, 2004 at 12:13 am #109586
    Penguin45
    Participant

    Hi,
    FHP is now a group comprising what was AEG’s motor division, ZEM Sole, and a czech firm whose name escapes me after several pints of beer. They have obviously opted for a common brush across the product range (12 AG 03 from Europart). There is one exception however – the high spin AEG motors with the cartridge holders are fitted with SUPER SIZED brushes, for which no separate inserts are currently available. You can buy gen under 8896454255770 or pattern from Europart under 12 AG 05.
    FHP can be contacted at http://www.fhp.com , but they never respond if you say the magic word – SPARES.

    Not sure if Merloni are involved – AEG and Zem Sole are part of Electrolux Group aren’t they?

    Hope this is of some use,
    Penguin.

    March 10, 2004 at 9:58 pm #109587
    eastlmark
    Moderator

    Re: Hotpoint WMA Carbon Brushes

    Sorry I forgot to check this today, but I have got the wash vac bin numbers if they are any use
    Bosch/seimens type brushes for Hotpoint WMA: 33396
    CESET type (the one I couldnt remember) :83416

    March 11, 2004 at 8:09 am #109588
    13amp
    Participant

    Re: Hotpoint WMA Carbon Brushes

    I am sure it is a Bosch motor not CESET (the washvac bin no. did’nt work)
    Can I send you a picture of the old ones?

    They are just Carbons on springs with a tag on the end that looks like 2 spade terminals.

    13

    March 11, 2004 at 10:12 pm #109589
    eastlmark
    Moderator

    Re: Hotpoint WMA Carbon Brushes

    Sorry, but I keep reading this post at home and dont have the stuff available to look it up from here. I promise I will do so tommorrow.
    Mark.

    March 12, 2004 at 10:09 am #109590
    eastlmark
    Moderator

    Re: Hotpoint WMA Carbon Brushes

    OK the Bosch/siemens brushes (with the 2 agled tags on them) is part number 1604462. (Wash vac33390 sorry for error)

    The CESET type with holders is1604470.

    March 12, 2004 at 3:55 pm #109591
    13amp
    Participant

    Re: Hotpoint WMA Carbon Brushes

    eastlmark wrote:OK the Bosch/siemens brushes (with the 2 agled tags on them) is part number 1604462.

    You’re a fine fellow, I thought I was right in that it was Bosch. 2 angled tags…thats the ones. cheers

    13

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.