Creda condenser tumble dryer T632CW intermittent heat

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Creda condenser tumble dryer T632CW intermittent heat

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 28, 2010 at 9:55 am #52035
    bobnorris
    Participant

    This machine starts to heat and after 1 or 2 minutes the live supply to the heaters via the 106 stat above the heaters drops out.Sometimes it will start heating randomly again for a few seconds.The stat kit 1701583 and front stat 1701575 have been changed to narrow the fault so it seems its probably the control board, electrue 5031688148963,special order at £51.13. Has anyone else had this trouble with the board or could it be related to the humidity sensor? If someones got a board in stock (preferably secondhand) i’d definately be interested,or what have I missed on this machine.
    Cheers Bob.

    January 28, 2010 at 1:18 pm #310389
    pup
    Participant

    Re: Creda condenser tumble dryer T632CW intermittent heat

    is there flot s/w ?

    January 28, 2010 at 5:16 pm #310390
    iadom
    Moderator

    Re: Creda condenser tumble dryer T632CW intermittent heat

    I have changed a few boards due to the heater relay sticking on and constantly blowing the TOC.

    I did see one a few weeks ago with the relay pins burnt and giving no heat.

    Have you had a close look at the board?

    Jim.

    March 16, 2010 at 11:00 pm #310391
    bobnorris
    Participant

    Re: Creda condenser tumble dryer T632CW intermittent heat

    Thanks Jim.I fitted a new board 1702391 and runs perfectly but couldnt see any dry joints .Reckon it must be a faulty relay.
    Cheers Bob

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.