Indesit WIXL143UK

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit WIXL143UK

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 1, 2010 at 5:17 pm #52124
    Payney
    Participant

    Hi all.

    I have been out to an Indesit WIXL143UK today that when powered up and set to run starts to run for about 2 seconds and then stops for about ten seconds and then repeats. I suspect the module may be at fault but not seen this before so hoping one of you guys can give me some advice as these modules aint cheap and look to need smart cards and stuff to get them to work which again is new to me.

    Any help and advice would be much appreciated

    Thanks in advance

    Mark

    February 1, 2010 at 5:50 pm #310682
    iadom
    Moderator

    Re: Indesit WIXL143UK

    Don’t bother with smart card and very expensive card reader. Send the PCB to Tony at EMW. They will test and if needed repair.

    http://www.emwelec.co.uk/

    Or

    http://www.qer.biz/servReps.htm

    February 1, 2010 at 5:50 pm #310683
    adv
    Participant

    Re: Indesit WIXL143UK

    try emw heil no 😆

    February 3, 2010 at 8:56 am #310684
    Payney
    Participant

    Re: Indesit WIXL143UK

    Thanks guys.
    A lot cheaper option that way.

    February 3, 2010 at 9:17 am #310685
    garn
    Participant

    Re: Indesit WIXL143UK

    We Seemed To Be Cloned 😆

    garn…. 😉

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.