Combined sink/hob

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Combined sink/hob

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 2, 2010 at 9:04 am #52137
    Steven
    Participant

    Hi Guys

    Going to look at I believe a hob and sink with microwave combined made by teka in a studio flat?

    Seen them new but never had to work on one before.
    Anyone had the pleasure and whats the access like to the hob section, fault is when any ring switched on blows trip.

    Is the hob plates and switches same as standard hob?

    Sorry no model info.

    Cheers for any info in advance

    Steven

    February 2, 2010 at 9:08 am #310731
    kwatt
    Keymaster

    Re: Combined sink/hob

    Many moons ago Bauknecht used to do one with a two ring hob, sink and fridge IIRC.

    There was nothing difficult or challenging about them and they were pretty good but it was pukka German kit.

    What the Teka one is like, who knows? 😉

    K.

    February 2, 2010 at 10:17 am #310732
    Steven
    Participant

    Re: Combined sink/hob

    just had the maintainence guy at the property look at it who said that he can see no access to underside, it appears the whole top may have to come off, so that means taps and trap.
    The cable goes into a terminal block then from there it disapears into the rear corner. :rolls:

    Found a company that sell them Elfin.co.uk

    So Ken doent look like they are built like the old bauknect 😆 😆

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.