- This topic has 1 reply, 2 voices, and was last updated 16 years, 2 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hi
This machines starts ok, heats ok then cuts out after about 30 seconds with the clean filter light on.
Have checked the whole machine for blockages etc, but it still happens
Any ideas ?Regards
ToniRe: AEG Lavatherm 57700-W (Tumble Dryer)
Does it do this on the timed cycle as well? Or is it just on one of the sensor cycles? If it doesn’t have a damp load in on the sensor cycle, it will do as you describe. If it does it with a suitable load in, then it’s probably something to do with the sensing mechanism, a brush that makes contact with the outside of the drum thus enabling conductivity of load to be measured.
Mike.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.