- This topic has 4 replies, 4 voices, and was last updated 16 years, 1 month ago by
.
-
Posts
-
called out to this dishwasher, it had leaked into the base because the thermister had worked its way out of its grommett. refitted, dried out and checked for leaks, all seemed ok. customer phones two days later and says it goes all through the program but does not heat. took another look, all the heating circuit appears to be ok. would the program carry on if it did not reach temperature! the only thing i can think of is that the thermister thinks its already up to temp. any other thoughts would be great as i dont want to go back with a new thermister if its not going to cure the fault.
cheers.Re: miele g646sc no heat.
This has the flow through element mounted on the LHS
just check the limit stat has not tripped out? can reset should see a red button 😉
hope this helps!!!
BrianRe: miele g646sc no heat.
heater and stats check out ok, relay coil has circuit, contacts look a bit black but ok i think.
- You must be logged in to reply to this topic.