Hotpoint WD61P

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WD61P

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • February 16, 2010 at 5:14 pm #52548
    geoff1
    Participant

    Hi

    Can anyone help me with a wiring diagram for one of these??

    I have a call on the next island down to me for the dryer which is not working. ( No heat/fan etc) Suspect it may be dryer timer but would like to go armed with everything to try and clear in one hit. ( involves 1 hour on ferry each way to get there)

    Many thanks

    Geoff

    February 16, 2010 at 5:53 pm #312246
    iadom
    Moderator

    Re: Hotpoint WD61P

    I would put it in the post but might miss the next ferry, check your inbox. 😉

    Its rarely the timer, common causes are wires to the fan motor snapping, fan stops, TOC on top of dryer box goes O/C.

    TOC ( one shot ) is a 1605635.

    Also check the wiring harness where it is lashed to the front of the motor if it has an FHP motor, it often chafes through there and where it is tied to the cabinet edge.

    Jim.

    February 16, 2010 at 7:45 pm #312247
    geoff1
    Participant

    Re: Hotpoint WD61P

    Ah

    That you for that – got it safe and sound.

    See what you mean about one shot cutting off neutral feed.

    Will go armed with manuel and TOC

    Again many thanks

    Geoff

    February 16, 2010 at 10:13 pm #312248
    iadom
    Moderator

    Re: Hotpoint WD61P

    geoff1 wrote:

    Will go armed with manuel

    I assume Basil Fawlty has given him the night off then. :rotfl:

    February 17, 2010 at 9:41 pm #312249
    lasty
    Participant

    Re: Hotpoint WD61P

    iadom wrote:

    geoff1 wrote:

    Will go armed with manuel

    I assume Basil Fawlty has given him the night off then. :rotfl:

    Beat me to it …… 😆

    February 17, 2010 at 11:06 pm #312250
    iadom
    Moderator

    Re: Hotpoint WD61P

    lasty wrote:

    Beat me to it …… 😆

    By nearly 24 hours, but then you are on the dark side of the Pennines. 😛

    February 18, 2010 at 12:12 am #312251
    Penguin45
    Participant

    Re: Hotpoint WD61P

    Better than the wet side, anyday.

    :p45:

    February 19, 2010 at 6:52 pm #312252
    lasty
    Participant

    Re: Hotpoint WD61P

    Why does it rain so much in manchester ?


    “`coz we deserve it …..”

    Told to me by a manc …. 😆

    Sorry , back to the plot ..

    February 23, 2010 at 10:08 pm #312253
    geoff1
    Participant

    Re: Hotpoint WD61P

    Ha

    I might as well taken Basil with me as it turned out to be the shaft on the drying timer knob split.

    Cable tie later and he is back on the go until I get a new one posted out.

    Geoff

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.