Ariston E15

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Ariston E15

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 16, 2010 at 6:11 pm #52550
    subs
    Participant

    AWD12 UK
    This error is listed as “Dryer heater relay”. I checked and meggered dryer element,checked pressure system and tightened all connections on board. Also looked for dry joints on relays. Was going to order board from EMW but when i did a search on here it seems this could be the wash heater down to earth. I only did a continuaty check on this at the time. Is this the probable cause and not the board?
    The machine fills starts to tumble then pumps out while timer clicks round and neaon flashes 15 times.

    Thanks

    Subs

    February 16, 2010 at 10:48 pm #312256
    iadom
    Moderator

    Re: Ariston E15

    When you get any fault code on Indesit based machines its a good idea to megger all components, particularly the elements for earth leakage if the fault is not obvious before going down PCB repair route.

    February 22, 2010 at 12:11 pm #312257
    subs
    Participant

    Re: Ariston E15

    Whet back to this armed with board from EMW and wash heater. Meggered heater which was fine. Board cured the fault.

    Thanks

    Subs

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.