Indesit WD12XUK 13 flashes Hmmmmm

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit WD12XUK 13 flashes Hmmmmm

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 16, 2010 at 11:18 pm #52566
    cornwell40
    Participant

    Right!!!!
    I’m getting 13 flashes and a rotovating knob about 30 seconds into the wash.
    Testing the dry side and it works …..to a degree.
    Gets hot and water in, drains etc BUT the fan doesn’t rotate. 240v to it and meter tests fine so suspecting it to be loose inside, just didn’t want to burn me pinkies today 😉 .
    My query is…..why does the f13 come up on wash and not dry and when the board tests on wash can it pick up a jammed fan ( had fan loose on occasions but never giving a code) or am I looking AT ANOTHER FAULT AS WELL :rolls: . Already onto third call as its a tiles down after install and butted up to a wall on the lh side so needed a big stick to get the legs up. Tennanted as well…it couldn’t be better 🙁

    February 17, 2010 at 12:22 am #312291
    Penguin45
    Participant

    Re: Indesit WD12XUK 13 flashes Hmmmmm

    The only F13’s I’ve ever had to deal with have bee broken wiring to the dryer ntc.

    Chris.

    February 17, 2010 at 8:48 am #312292
    cornwell40
    Participant

    Re: Indesit WD12XUK 13 flashes Hmmmmm

    Usually pretty easily sorted one I know, but I’ve tried everything bar the board so far 😉 . I’ll do the fan and see what happens next….probably f13 🙁 .

    TC

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.