Baumatic bdw15 lower spray arm not working

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Baumatic bdw15 lower spray arm not working

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 17, 2010 at 3:08 pm #52575
    Johnnyboy
    Participant

    Hi I have a D/W with the half load option on so as to stop the lower spray arm operating, could it be the wash motor , is there a divertor or the module? The half load light is not illuminated so I think it rules out the programmer. Its just the job is 65 miles away so any advice pre visit would be welcome.
    Cheers Johnnyboy

    February 17, 2010 at 9:29 pm #312327
    aqualectric
    Participant

    Re: Baumatic bdw15 lower spray arm not working

    Solenoid operated flap type diverter valve – think Indesit d/w motor. If it is the diverter valve solenoid or the flap has fallen off inside the chamber (common), it comes as one piece with the motor £63 + VAT from Connect.

    Hope that helps,

    Steve.

    February 18, 2010 at 4:31 pm #312328
    loopey
    Participant

    Re: Baumatic bdw15 lower spray arm not working

    take valve off remove flap . its only energised once pump is active
    , the force of water keeps it in place they do stick some times ..
    hth phil

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.