Indesit WI 121 pcb on WI 101 will it work

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit WI 121 pcb on WI 101 will it work

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • February 17, 2010 at 5:56 pm #52580
    ray.t
    Participant

    Hi I have a wi101 with the 8 flashes timer rotates I am sure its the pcb. I have a board from a wi121 that I know is good. Is it worth a shot?
    Cheers, Ray

    February 17, 2010 at 10:14 pm #312333
    clyde
    Participant

    Re: Indesit WI 121 pcb on WI 101 will it work

    it’ll have a different programme file will need reprogramming with a smartcard

    February 18, 2010 at 12:15 am #312334
    Penguin45
    Participant

    Re: Indesit WI 121 pcb on WI 101 will it work

    It probably will – whether or not the pcb will accept the reduced top speed of the motor is the only issue I can see – the buttons are all the same.

    Where have you been hiding, Clyde? Nice to see you back.

    Chris.

    February 18, 2010 at 7:18 am #312335
    ray.t
    Participant

    Re: Indesit WI 121 pcb on WI 101 will it work

    Thanks. As the washing machine was going to be scrap if I couldn’t fix it I thought I would give it a go. Tried it on 2 washes last night and it seems to work ok.
    I will try a few more washes today and see what happens.
    Thanks, Ray

    February 18, 2010 at 11:55 am #312336
    A1engineer
    Participant

    Re: Indesit WI 121 pcb on WI 101 will it work

    done it before should be ok

    February 19, 2010 at 9:56 pm #312337
    clyde
    Participant

    Re: Indesit WI 121 pcb on WI 101 will it work

    Hiya Chris it’s been a while and good to be back!


    @ ray how did the machine get on in test?

    February 20, 2010 at 8:23 am #312338
    ray.t
    Participant

    Re: Indesit WI 121 pcb on WI 101 will it work

    Hi The machine works fine. I have run it through a few washes now and all seems ok.
    Cheers, Ray

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.