Homeking HL13

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Homeking HL13

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 20, 2010 at 9:20 am #52650
    Spinfast
    Participant

    Could anyone help identifying the manufacturer of the above dishwasher and where i could obtain spares from. The appliance has an E3 fault appearing after approximately ten minutes
    Many thanks in advance
    Spinfast

    February 20, 2010 at 11:32 am #312604
    A1engineer
    Participant

    Re: Homeking HL13

    afraid it is yet another chinese machine, made by baumatic i think, e3 is a no heat fault, check the obvious 1st but have had a few with connections not crimped properly finding the offending wire can be time consuming 😯

    February 20, 2010 at 3:44 pm #312605
    Jazzmeister
    Participant

    Re: Homeking HL13

    I think this is the matsui type…prpbably the safety cuts outs located underneath ( probably 2 ) one or both will be o/c..hence E3 fauly no heat!

    Not that expensive think the stats (2) are about £3 from connect!
    Nice easy cheap repair if ya call out is not too expensive! 😉


    Possibly these! 5045170730437

    Hope this helps

    Jazz!

    February 26, 2010 at 6:28 am #312606
    Spinfast
    Participant

    Re: Homeking HL13

    Thanks A1 & Jazzmeister for the info
    Regards
    Spinfast

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.