miele ws5406

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › miele ws5406

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 22, 2010 at 4:00 pm #52703
    maxx
    Participant

    hi guys,door wont open ,origional fault was door interlock damaged, replaced interlock(not cheap!!!)not familiar with this make and finding information hard to come by, any ideas??

    February 22, 2010 at 11:37 pm #312830
    washermanuk
    Participant

    Re: miele ws5406

    Does the machine work with door closed? and can you open it by pulling the manual release? Did old interlock full in bits or short out? Just have a quick look at switch bank make sure none of the tracks have blown on the door realease?
    Being Semi-commercial i have no access to any tech or wiring diagrams :rolls:
    Hope it helps?
    Brian

    February 23, 2010 at 4:49 pm #312831
    maxx
    Participant

    thanks for the reply brian.
    yes, the machine works with the door shut,and it will open by pulling the manual release.the old interlock was in bits.i checked the swichbank, as you suggested ,which had damaged tracks, this was replaced with a working switchbank from another miele which has damaged bearings.still wont open the door.guess im going to have to spend some time with my meter.thanks again.mac

    February 23, 2010 at 7:05 pm #312832
    washermanuk
    Participant

    Re: miele ws5406

    No probs matey 😉 hope you sort it?
    Just check all pcb’s i suppose :rolls:

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.