whirlpool hob element

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › whirlpool hob element

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • February 23, 2010 at 2:35 pm #52726
    bmrenr
    Participant

    Hi I am looking for a part no. for a whirlpool hob element as there is no service no. on the appliance.All thats written on the hob is easytronic and schott ceran.On the back of the element is cermaspeed model IR230 P8771D. WATTS 2400 VOLTS 240 . 461961508711.

    Cheers Tom.

    February 23, 2010 at 2:52 pm #312871
    EFS
    Participant

    Re: whirlpool hob element

    Generic hotplates are widely available at a fraction of Whirlpool prices.
    They sometimes light up with a different pattern when hot.
    But then again so do the genuine ones so why pay over the odds. 😉

    Steve

    February 23, 2010 at 3:27 pm #312872
    bmrenr
    Participant

    Re: whirlpool hob element

    Cheers steve my supplier says he needs a part no. or service no. so he can send me the correct pattern part.

    Tom

    February 25, 2010 at 1:19 am #312873
    leavemetogetonwithit
    Participant

    Re: whirlpool hob element

    230 is almost certainly the diameter of the element. Have a dekko here for some inspiration. Closest looks like last one on page.
    http://www.elementman.co.uk/Hobs/ceramic.htm
    Mike.

    February 25, 2010 at 2:11 pm #312874
    bmrenr
    Participant

    Re: whirlpool hob element

    Cheers Mike I have since found the part no. 481225998408 .It has two coils . My supplier cant find a generic part for this and the price for a genuine part is 175 euro + vat so customer is going to work away without it for now.Thanks for the info on element man may use him in the future.

    Tom.

    February 25, 2010 at 7:06 pm #312875
    leavemetogetonwithit
    Participant

    Re: whirlpool hob element

    I wasn’t suggesting you should buy from elementman. His is a retail site and normally much more expensive than Connect, Masterpart, Qualtex etc. However his site and others like it are well made and are excellent for finding what parts look like, dimensions, and especially what models they fit.
    Mike.

    February 26, 2010 at 1:09 am #312876
    bmrenr
    Participant

    Re: whirlpool hob element

    No prob Mike most of the stuff I use is from Qualtex and I agree his site will be helpfull for finding what parts look like . Thanks again.

    Tom.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.