- This topic has 3 replies, 4 voices, and was last updated 16 years, 1 month ago by
.
-
Posts
-
HI
I have all the option lights & Start/Pause light flashing rapidly after a couple of minutes
It seems to start ok, although the fill is start stop a couple of times then goes into tumbling with water in, then stops & goes in to a drain with the lights flashing rapidly
Cant find fault code for this
Any Ideas ?
Cheers
ToniRe: WDL520P
If some or all of the lights are flashing rapidly then THIS may be the help you need. 😉
Re: WDL520P
Toni
PostPosted: Wed Feb 24, 2010 10:44 am Post subject: WDL520P
HI
I have all the option lights & Start/Pause light flashing rapidly after a couple of minutes
It seems to start ok, although the fill is start stop a couple of times then goes into tumbling with water in, then stops & goes in to a drain with the lights flashing rapidly
Cant find fault code for this
Any Ideas ?
Cheers
ToniWas it the Cap as Jim suggested?
Got a cust reporting same problem, would like to give estimate over phone. Originally bought 100 of these caps from farnell and used 5 so far 😳
Re: WDL520P
Hi
I had a WML540 the other week with similar symptoms.
Fill, Pause, fill, motor starts to agitate will filling, lights all start to flash and pump kicks in to drain.
When the lights/pump kicked in the water level was just over the edge of door seal which is too high.
In my case turned out to be the pressure switch causing overfilling.
May be worth checking pressure system is not blocked or there is a problem with the switch.
HTH
Geoff
- You must be logged in to reply to this topic.