zan zwd1261w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zan zwd1261w

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • February 24, 2010 at 5:36 pm #52768
    robbo1973
    Participant

    this machine is doing my head in!the original fault was the door had to be slammed to start so i went and the door shuts but sort of just pushed up no definite connection.checked the lock and handle assy nothing wrong so i thought i would try a new i/lock on but it was still the same.Ok I thought it has to be the pecker assy so ordered and fit and guess what still the same.
    Has anyone had this before as it is baffling me there are only 2 parts and i have changed both it is as if the pecker is too big 😀 .

    914600532-00

    cheers chris

    February 24, 2010 at 7:48 pm #313048
    gandh1
    Participant

    Re: zan zwd1261w

    hinge bent?

    February 24, 2010 at 8:17 pm #313049
    bigchrisoioi
    Participant

    Re: zan zwd1261w

    normally find the door lock pin has moved and not central in the door inner mounting causing a e40/e41 diagnostic code!….splitting the door and pushing the pin back in normally sorts it…….is there a code in diagnostics?

    February 24, 2010 at 10:24 pm #313050
    robbo1973
    Participant

    Re: zan zwd1261w

    everything is sitting fine and there is no fault code showing.if you bang the door shut it starts and the hinge aint bent.

    February 25, 2010 at 1:26 pm #313051
    gandh1
    Participant

    Re: zan zwd1261w

    dont suppose the door gasket has been changed / removed and refitted circa time of door starting to not shut properly has it?

    February 25, 2010 at 6:35 pm #313052
    robbo1973
    Participant

    Re: zan zwd1261w

    i removed the lip of the gasket and folded it inside and still the same this one is really baffling me know,the only thing i can think of is if the machine was a recon as it is in a let property then could have the wrong stickers on>

    cheers

    February 25, 2010 at 7:11 pm #313053
    leavemetogetonwithit
    Participant

    Re: zan zwd1261w

    robinsonrobbo wrote: it is as if the pecker is too big 😀 .

    cheers chris
    File it down?
    Mike.

    February 25, 2010 at 7:14 pm #313054
    Martin
    Participant

    Re: zan zwd1261w

    robinsonrobbo wrote: so i thought i would try a new i/lock on but it was still the same.Ok I thought it has to be the pecker assy so ordered and fit and guess what still the same.

    “Pecker assy”??? Since when have Zanussi W/d’s had them? 😕

    Normally either the door interlock or the mains on/off switch give symptoms such as you describe but a “pecker” (Hotpoint/Hoover phraseology in my book) has me foxed. 🙁

    But if by pecker you mean door hook then before you mess with that why not operate the interlock mechanically with a screwdriver to see if electrically it locks and the machine fires up otherwise you could be barking up the wrong tree?

    February 25, 2010 at 7:39 pm #313055
    leavemetogetonwithit
    Participant

    Re: zan zwd1261w

    Don’t you find that technique doesn’t seem to work too well with Zanussi,
    Martin? It always seems to me that the positioning of everything has to be exact, otherwise it’s no go.
    Mike.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.