- This topic has 6 replies, 4 voices, and was last updated 16 years, 1 month ago by
.
-
Posts
-
Been out to one of these dishwashers today.
Smeg DI612C (fully integrated)
Customer was supprised to find it working when he attempted to show me the fault. I stayed with it for about 30 mins and just as I was about to go it did it!
Machine drained down, the pump and water valve both ran for about 1.5 secconds whil it beeped twice. Slight pause (2 – 3 secconds) then continued this fill & empty while beeping thing again. This continues until the door is opened. The machine did not display any error code for me, the only light displayed was the selected program, however the customer did inform me that he was sure the end light (intensive wash) was flashing. I looked in the instruction book as he had it at hand but this error code wasn’t mentioned.
I think Its the PCB but I could be wrong!!!
Help please?
Thanks
Robert.Re: Smeg DI612C pulsing in cycle.. Weird!!!
Base of dishwasher is perfectly dry and I tested the heater with a 1000v megger insulation test and it was perfect. All its components seem to be functioning fine..
Rob.
Re: Smeg DI612C pulsing in cycle.. Weird!!!
Base of dishwasher is perfectly dry and I tested the heater with a 1000v megger insulation test and it was perfect. All its components seem to be functioning fine..
Rob.
- You must be logged in to reply to this topic.