Creda T622cw Motor only runs for a short while

Home Forums Public Support Forums Help And Support Washing Machine Help Forum Creda T622cw Motor only runs for a short while

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #52770
    scallywag
    Participant

    Unusually my Creda T622cw heats ok but the motor only runs for a short while and then stops. Any ideas? Its not heat related as the same thing happens if it’s on the cooling cycle. Could it be it stops when its time to reverse? How does the reverse system work? To re-start it has to be left a little while and the start button pressed again.
    Thanks.

    #313062
    helo_75
    Participant

    well

    id be checking the plug top

    but that faults usually a relay fault

    #313063
    Penguin45
    Participant

    Re: Creda T622cw Motor only runs for a short while

    RELAY.

    Penguin45.

    #313064
    scallywag
    Participant

    Re: Creda T622cw Motor only runs for a short while

    Thanks for the guidance, Plug Top OK, Power Ok to machine even when motor stops. Relay pulls in when start button pushed then after a while drops out and motor stops. Sometimes it will restart straight away but mostly a wait is required. Is this just a power relay for the moror? or is it more complex? do i need to check the supply to the relay coil? I guess its somehow self latching.

    #313065
    Penguin45
    Participant

    Re: Creda T622cw Motor only runs for a short while

    The vibration does them in – just replace the relay.

    Penguin45.

    #313066
    scallywag
    Participant

    Re: Creda T622cw Motor only runs for a short while

    Thanks guys, you were spot on, the relay fixed it. Slightly gutted I didn’t do a web search on the relay part number, they are only £8.

    #313067
    iadom
    Moderator

    Re: Creda T622cw Motor only runs for a short while

    £8….where from?????

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.