Indesit Pressure switch

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #52878
    Phidom
    Participant

    Washer dryer WDG1195W. This machine has 2 pressure switches, a small black one and a larger grey/brown one. It is overfilling and I traced the problem to the larger switch. I ordered part No. 056336 and it came today. It is different to the old one in that it is designed to take a multi pin plug rather than individual spades. Also the numbers are different. The old one has numbers 11,12,13,21,22 & 23. The new one is 11,12,14, 31,32 & 34. I’m not sure if it’s the wrong one or they have changed the spec. 😕 Any ideas anyone?

    #313485
    iadom
    Moderator

    Re: Indesit Pressure switch

    Two different switches. Before serial number 80118.0000 its a C00034283.
    After serial number 80188.0001 its a C00056336.

    Jim.

    #313486
    Phidom
    Participant

    Re: Indesit Pressure switch

    Thanks Jim. The other number also comes up as a multi pin plug job. Well I fitted it and it seems to work OK. I connected the 20 something wires to the 30 something connections, with insulting tape on a middle spade to stop them shorting.

    #313487

    Re: Indesit Pressure switch

    Phidom wrote:insulting tape

    Sounds like useful stuff. Where can I buy some?
    Mike.

    #313488
    Penguin45
    Participant

    Re: Indesit Pressure switch

    Ask Lee – it might be a loop, mind you.

    Chris.

    #313489
    pup
    Participant

    Re: Indesit Pressure switch

    leavemetogetonwithit wrote:

    Phidom wrote:
    insulting tape

    Sounds like useful stuff. Where can I buy some?
    Mike.

    i got some but need to find it first 😆

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.