Hotpoint BFU620X

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint BFU620X

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 3, 2010 at 7:35 pm #52965
    Alanj
    Participant

    Hi again guys,
    another Hotpoint dishwasher, same sort of fault, washes but after so long stops,beeps and plate warming or drying light flashing. Have tested heating element so am guessing PCB. any other thoughts? 🙁
    Alan

    March 3, 2010 at 8:57 pm #313862
    A1engineer
    Participant

    Re: Hotpoint BFU620X

    light 4 flashing, is a no heat fault, check heater, 1 shot( if fitted) and check ntc is attached to door just above soap disp.
    check solder joints and connections at card, thick pink wire

    if all ok replace card.

    March 4, 2010 at 5:10 pm #313863
    Alanj
    Participant

    Re: Hotpoint BFU620X

    Thanks A1, thought it might be card.

    Alan

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.