Guestion about whirlpool AWO series and PCB Cards

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Guestion about whirlpool AWO series and PCB Cards

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 4, 2010 at 9:23 pm #52991
    vito
    Participant

    Hi,

    I have two Whirlpool AWO series washers. First one is without display and second one have display, they look outside almost same machines, and im thinking is there same PCB card both of machines?

    AWO/D4310 1000rpm, 5kg load

    http://www.onoff.com/online/fi/inet.nsf … als=45982~

    AWO/D6730 1400rpm, 6kg load

    http://www.bestpc.lv/images/Whirlpool{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}2 … 043135.jpg

    If the pcb card is same on both models, i can fix one working machine.

    Thank you

    March 5, 2010 at 6:49 am #313937
    Phidom
    Participant

    Re: Guestion about whirlpool AWO series and PCB Cards

    They won’t be identical but might be similar enough to work OK. If the alternative is 2 scrap machines you have nothing to lose. Make sure you do a sketch of what wires go where. New Whirlpool spares are very expensive and as far as I know, nobody currently offers a repair service for these boards.

    March 5, 2010 at 10:13 am #313938
    vito
    Participant

    Re: Guestion about whirlpool AWO series and PCB Cards

    Okay thanks, i think i wont do nothing because that cheaper one is working allready and if those pcb are not exactly same, theres no sense, take risk.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.