whirlpool ADG 923 pump failure

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › whirlpool ADG 923 pump failure

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 7, 2010 at 10:40 am #53041
    domestique
    Participant

    Acquired a Whirlpool ADG 923 from a friend and have used it plenty of times with no problem. It is now failing to pump out water mid cycle. Removed arms and cleared the dishwasher of any food bits but still not working on all three cycles. Wondering if this is just a pump problem and easy to replace and fit myself or something more complicated that requires a tech.

    Any advice would be much appreciated!

    Domestique

    March 7, 2010 at 12:33 pm #314167
    Penguin45
    Participant

    Re: whirlpool ADG 923 pump failure

    You can access the drain pump by removing the lower cover panel. It’s a twist fit.

    Power off first, please.

    Penguin45.

    March 7, 2010 at 7:13 pm #314168
    domestique
    Participant

    Re: whirlpool ADG 923 pump failure

    thanks Penguin45, is there a way to test the pump, if it is the problem, once I’ve removed it?

    thanking you in advance!

    March 7, 2010 at 7:48 pm #314169
    Penguin45
    Participant

    Re: whirlpool ADG 923 pump failure

    If a foreign body falls out of the pump chamber when you remove the pump, you won’t need to test the pump. 😀

    Otherwise, a resistance check should show 190-240 ohms.

    Penguin45.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.