- This topic has 4 replies, 5 voices, and was last updated 16 years ago by
.
-
Posts
-
914602122-01
been here and fault code coming up is E72 which is fault in ntc on drying condensor,after looking on tds there is a sensor in the pipe at the bottom of the condensor and one in the dryer chamber i am thinking it must be the bottom one but can someone confirm this?
cheers chris
Re: AEG W/D
Yes you are thinking right it refers to the one on the condenser to tub hose, check the wires to the ntc they have a habbit of breaking older versions you can re-do the wires with tags but the later ones are idc type blocks.hope this helps
Re: AEG W/D
Agree with Chris
NTC at the bottom, had this a while ago, loom etc ok. Turned out to be pcb
Steve
Re: AEG W/D
One more thought while you at it….take the NTC right out of that bottom hose and clean it. The sludge build-up in that bottom hose cakes the phial and leads to inaccurate readings. So while your cleaning the condenser ducting and checking the wires it’s best to kill 3 birds with one so to speak! 😉
- You must be logged in to reply to this topic.