Creda washing machine Mod W100 FW

This topic has 6 replies, 5 voices, and was last updated 16 years ago by Ashby.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
March 14, 2010 at 8:28 pm #53234

Ashby
Participant

Hi, I can only get this machine to work when i bypass the door interlock.
I’ve tryed several differnt ones and it still wont work?
ideas anyone?
Thanks.
Ashby 🙁

March 14, 2010 at 8:53 pm #314984

A1engineer
Participant

Re: Creda washing machine Mod W100 FW

board will be blown, change lock and board 😉

March 14, 2010 at 9:20 pm #314985

A1TEC
Participant

Re: Creda washing machine Mod W100 FW

I had a wm62 with the same problem, changed interlock and soldered wire on to blown track on board and linked it into the other side of the push-on connector. Done the job. 😉

John.

March 14, 2010 at 9:45 pm #314986

Ashby
Participant

Re: Creda washing machine Mod W100 FW

I’ve checked the board and can’t see a blown track? Will take a closer look.
Thankyou both for your help.
Ashby

March 15, 2010 at 12:32 am #314987

Penguin45
Participant

Re: Creda washing machine Mod W100 FW

Door lock going bang will usually blow the corner off a surface-mount triac in the right lower corner. Doesn’t always take the tracks out.

Chris.

March 15, 2010 at 11:35 am #314988

iadom
Moderator

Re: Creda washing machine Mod W100 FW

Had a WMA on Friday with a blown doorlock. There was no sign of any physical damage to the PCB, even that lower triac was visibly OK, It still needed a new board to get it working though.

Jim.

March 15, 2010 at 6:54 pm #314989

Ashby
Participant

Re: Creda washing machine Mod W100 FW

Hi, Thankyou all for your help. I found a blown track. Didn’t see it the 1st time i looked, time to take a trip to the opticians.
All repaired and working fine now.
Many thanks.
Ashby 😆
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.