hotpoint aquarious wd440

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint aquarious wd440

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 16, 2010 at 6:23 pm #53283
    paddyd99
    Participant

    I have this washer dryer in the workshop. I cant get the interlock to engage. I can select the program and activate that but the door wont lock and the door lock light is of. I bypassed the lock and it worked for a second then stopped. Module??? Anyone any ideas.
    Cheers,
    Paddyd

    March 16, 2010 at 6:50 pm #315212
    Phidom
    Participant

    Re: hotpoint aquarious wd440

    Have you checked for damage on the module? Often the interlock goes short circuit and blows strips on the PCB.

    March 18, 2010 at 4:55 pm #315213
    paddyd99
    Participant

    Re: hotpoint aquarious wd440

    no visable damage to the module, no damage to wires, customer said it did trip the breaker just before fault appeared..

    March 18, 2010 at 8:51 pm #315214
    sene
    Participant

    Re: hotpoint aquarious wd440

    Module fault will cause and door light not to come ON and not locking. Pt. No. C00254535 but you will need smart card reader as well

    March 18, 2010 at 9:16 pm #315215
    Penguin45
    Participant

    Re: hotpoint aquarious wd440

    sene wrote:you will need smart card reader as well

    EMW and you won’t…

    Chris.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.