Bosch Hydrosensor SGS 5342gb

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Bosch Hydrosensor SGS 5342gb

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 20, 2010 at 6:34 pm #53392
    Ject05
    Participant

    Hi, I would like to replace the hose on this machine that comes from under the tub and into the side of the tub (on the right side) this is because the length that goes under the tub has had a mouse attack and is no longer useable (leaks… alot) my question is where does the other end of the hose / pipe connect to? I cannot see it.
    Thanks i advance

    March 21, 2010 at 12:51 am #315774
    Penguin45
    Participant

    Re: Bosch Hydrosensor SGS 5342gb

    Is this a translucent hose hose fitted into a white plastic fitting on the side of the tub? If so, this is just a steam breather hose. It simply ends under the tub and isn’t connected to anything.

    If the tray under the machine is filling with water, this isn’t the culprit.

    Penguin45.

    March 21, 2010 at 8:29 pm #315775
    Ject05
    Participant

    Re: Bosch Hydrosensor SGS 5342gb

    Thank you for your advice, water seems to be from a small leak on a seal, hopefully all fixed now. Replaced length of pipe as well (at least I haven’t got to keep looking in the base to see where the end goes now!)

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.