Servis M9503W – Washer drier – Triple Cold Vave

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Servis M9503W – Washer drier – Triple Cold Vave

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • March 23, 2010 at 4:20 pm #53465
    MickGeorge
    Participant

    Hi folks

    Need a triple cold walve for above machine as one of the valves is not seating propley and filling machine when not in use.

    Acording to Connect part is obsolete but machine is only 18mth – 2yrs old !!! :?. Also showing same model can be hot and cold fill but this one is cold fill only so need triple valve – unless you can convert to hot and cold fill?

    Can anybody shed any light on this for me – a part no or replacement part please – even a partern part would do

    Thanks

    Mick

    March 23, 2010 at 4:56 pm #316098
    bazza500
    Participant

    Re: Servis M9503W – Washer drier – Triple Cold Vave

    do you have the serial no.?

    March 23, 2010 at 4:57 pm #316099
    petalpop
    Participant

    Re: Servis M9503W – Washer drier – Triple Cold Vave

    try connect no/ 5031684750924
    its a hotpoint one but sure it will fit

    March 23, 2010 at 5:25 pm #316100
    iadom
    Moderator

    Re: Servis M9503W – Washer drier – Triple Cold Vave

    If they are bog standard valves then you could always pop off the solenoid, unscrew the plunger and diaphragm complete from a new pattern valve and use that.

    March 24, 2010 at 9:03 am #316101
    MickGeorge
    Participant

    Re: Servis M9503W – Washer drier – Triple Cold Vave

    Thanks for the replys guys.

    It looks like the one you suggested petalpop might fit so thanks

    I didn’t know you could strip the new type valves any further than taking the solenoid off – thought they were all moulded after that – but will inspect further – knew the old vaves that were screwed together all came apart but they are in the long distant past and showing my age – but thanks for that info Iadom will take a look.

    Many thanks for the replies folks much appreciated. 😀

    Mick

    March 24, 2010 at 9:36 am #316102
    iadom
    Moderator

    Re: Servis M9503W – Washer drier – Triple Cold Vave

    I use a pair of long nosed pliars to unscrew the plunger assy. You can get most of them out although you do get the odd one that wont budge.


    If you do fit the Hotpoint one you must make sure that the solenoid that goes to the condensor from the Hotpoint valve is the same one on the Servis machine.

    The solenoid coil for the condensor is designed to be energised for long periods and the flow through the valve should only be a steady trickle.

    March 24, 2010 at 9:47 am #316103
    Martin
    Participant

    Re: Servis M9503W – Washer drier – Triple Cold Vave

    The triple valve you need Mick is 5045171892554 (Connect part number) as the restrictor on the Hotpoint one is in the wrong valve outlet. But an even better alternative is the Qualtex VAL21 but remembering to take the condenser flow restrictor out of the old valve and fit it to this one of course. 😉

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.