- This topic has 3 replies, 3 voices, and was last updated 16 years ago by
.
-
Posts
-
G-day im having problems with this dishwasher,and finding parts. It seems to go right through a complet cycle, filling and emptying ect but the water does not get hot and it does not clean. I have it apart and know for sure that the main pump does not kick in. I have put mains power directly to the pump unit and the heating elements and they all work. Have checked pressure switch and float switch and they seem ok . The thermostate seemed to be working when summerged in hot water. With out a symatics drawing im struggling. Im a fitter and machinest, not an electrichan. Any help would be much appreciated. cheers.
Re: Bosch dishwasher sps2432au/03
Hi Guzz
Moved you down to the Australian forum, you may well get a more “local” response there.
Don
Re: Bosch dishwasher sps2432au/03
The standard failure on these machines is the wiring loom breaking at the door pivot point.
The circulation motor uses a relay as it’s start device – that may have failed.
The heater has a diaphragm pressure switch fitted, so no circulation = no heat.
For parts and exploded diagrams, go to http://www.bshcustomerservice.com and follow the links into spare parts.
Not much chance of a wiring chart, I’m afraid.
Penguin45.
- You must be logged in to reply to this topic.