- This topic has 5 replies, 3 voices, and was last updated 16 years ago by
.
-
Posts
-
Hi. I’ve got one of these overfreezing and from reading posts I suspect fridge temp probe is faulty. Can anyone give me some measurments for where I should start digging or even just a rough idea. thanks. Just to make sure I’m on the right track the freezer is also getting to -27 but I’m assuming this is also due to fridge probe.
Re: Hoover HCF 6200 A. temp probe location
from the back with the condensor removed Find out the indicated position, on the
outer back wall of the appliance (Ref. X
in Picture 11). This is the exact centre
of the window, to be opened next.
Dimension H (measured from the top
edge of cabinet): 168 mm.
Dimension L (measured from the left
side edge of cabinet): 172 mm.give me a email address and will send you pdf walk through 🙂
hth
Re: Hoover HCF 6200 A. temp probe location
DOCTORDOOM wrote:Hi. I’ve got one of these overfreezing and from reading posts I suspect fridge temp probe is faulty. Can anyone give me some measurments for where I should start digging or even just a rough idea. thanks. Just to make sure I’m on the right track the freezer is also getting to -27 but I’m assuming this is also due to fridge probe.
could be pcb most times it is
- You must be logged in to reply to this topic.