- This topic has 1 reply, 2 voices, and was last updated 16 years ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hi
I currently have error code 104 with the tub full and the pump making very quiet wirr wirr noises. I drained the tub and there appeared to be water dripping through the pump. Is there a secret to installing the pump so that there is a proper seal. I tested the pump and it showed 25 ohms. I had read it should be much higher. Is 25 ohms enough for the pump to work.
Many thanksRe: Fisher and Paykel GW709 Error Code 104 (01101000
Pump should read c.33ohms. If water is running through the pump, the shaft seal is leaking and you need a replacement pump.
104 is a comms error, so doesn’t collate with the machine not draining. Possible that a foreign object is lying above the pump inlet.
Penguin45.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.