hi guys , having trouble with this washer , originally it starts to take in water but when the door is opened no water is dripping from the inside walls and no water visible , removed side panel matrix looks ok little black at opposite side to inlet valve , removed filter in wash compartment , full of gunk and what looked like paper and a garment wash care tag?? i was thinking the same ! the washing m/c is for that right ! anywho removed the filter parts and gained access to the pump more pieces of fag plastic wrapping i can see a blue filter in the bottom of the sump has a little more gunk there but cant gain access a little hose from the sump to the matrix 8 to 10 mm diameter is half blocked too, cleaned as best i can put all back together connected water and power and viola water entering the wash compartment hooray installed washer under counter had a cup of coffee turned on the washer and !! ? water came in but it stopped after about 2 mins ? pumped water out tried again , this time nothing just little spurts of water !! just spent 2 1/2 hours under this m/c anyone got any ideas would appreciate some help thanks