Indesit DV620K Dishwasher 100bit

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit DV620K Dishwasher 100bit

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 21, 2010 at 1:45 pm #54106
    mike412
    Participant

    Hi Folks,

    This D/W has fault code 1+3 (filters blocked).

    Can this also be interpreted as ” Circulation Pump gone bosoms up “.

    For my better understanding of the problem, what triggers this fault code?.

    Regards,

    Mike

    April 21, 2010 at 8:58 pm #318426
    Penguin45
    Participant

    Re: Indesit DV620K Dishwasher 100bit

    Little pressure switch in the pump outlet hose gets clogged and can cause this.

    Chris.

    April 22, 2010 at 7:55 pm #318427
    mike412
    Participant

    Re: Indesit DV620K Dishwasher 100bit

    Thanks Chris.

    One of our colleagues has kindly sent me the full manual for this model, so I am now better informed.

    I guess that we are looking at a blockage of some sort. Got to go back to this job on tuesday. Is this switch accessable from the front?. Not looking forward to getting this one out of the cabinetry, not the best of installations.

    Regards,

    Mike.G

    April 22, 2010 at 9:49 pm #318428
    iadom
    Moderator

    Re: Indesit DV620K Dishwasher 100bit

    mike412 wrote:

    One of our colleagues has kindly sent me the full manual for this model
    😳 🙂

    Access from underneath, the pressure sensor sits just above the main circulation pump in the centre of the machine.

    Jim.

    April 23, 2010 at 12:11 am #318429
    Penguin45
    Participant

    Re: Indesit DV620K Dishwasher 100bit

    iadom wrote:Access

    This is, of course, a relative term….

    Chris.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.