fitting intigrated freezer neff

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › fitting intigrated freezer neff

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 28, 2010 at 6:19 pm #54273
    adv
    Participant

    went to this to fit in new built in freezer. 4 drawer,replaceing old style. g4522x0gb/01 with g1524x7gb/02 all goin fine fits extra, but no way to fit left hand hindge side to wood panel.mmm was mystifyd phone ther technical dept. say i need to go to a kitchen fitters to get hinges. ha wat a joke a said.any one had this and what hindges to get ta?

    April 28, 2010 at 10:03 pm #319047
    Steven
    Participant

    Re: fitting intigrated freezer neff

    I had it with BI Neff F/F

    just as an example but you should be able to pick up from any good DIY shop

    http://www.screwfix.com/prods/12202/Iro … -Pack-of-2

    If this is the IN COLUMN style machine then you need this type hinge to mount the wooden door.

    I suspect your old one had cut out slots in the appliance door and the hinges were attached direct to that?

    You have to fix the new style hinges to the carcus (if room) try and get as slim style as possible just need to line up and screw in place.

    HTH
    Steven

    April 28, 2010 at 10:14 pm #319048
    adv
    Participant

    Re: fitting intigrated freezer neff

    yeh fitted to carcus. she got a new neff cause thoght it would be a straight swop dissapointed to say the least 😳

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.