- This topic has 4 replies, 2 voices, and was last updated 15 years, 11 months ago by
.
-
Posts
-
Dishwasher came up with fault code F7. Cleaned all filters and spray arms. Now not showing a fault code but after switching on makes a sound as if pump is working then, when it would normally start filling with water, it stops and beeps. Light is flashing on start button 6 times between pauses.
MIFFY715 wrote:Dishwasher came up with fault code F7. Cleaned all filters and spray arms. Now not showing a fault code but after switching on makes a sound as if pump is working then, when it would normally start filling with water, it stops and beeps. Light is flashing on start button 6 times between pauses.
Can anyone please help as I am getting fed up of having to wash up by hand!
Diplomat ADP8332
Have replaced fill chamber but still no joy. Water does not seem to be entering m/c. Have checked no kinks. Please HELP!!!! Start button still flashing 6 times.
MIFFY715 wrote:
MIFFY715 wrote:
Dishwasher came up with fault code F7. Cleaned all filters and spray arms. Now not showing a fault code but after switching on makes a sound as if pump is working then, when it would normally start filling with water, it stops and beeps. Light is flashing on start button 6 times between pauses.Can anyone please help as I am getting fed up of having to wash up by hand!
Re: Diplomat ADP8332 beeping
error 6 is a not filling in time fault.
error 7 is a flow meter fault.So valve, flow meter, wiring, connections or even pcb are your possible culprits.
Power off, unplug machine electrically when testing / investigating!!!
- You must be logged in to reply to this topic.