those nasty w/p pumps which leak from the rubber and…

Home Forums Trade Technical & Spare Parts Forums Trade Technical Enquiries those nasty w/p pumps which leak from the rubber and…

Viewing 15 posts - 1 through 15 (of 19 total)
  • Author
    Posts
  • #54383
    gandh1
    Participant

    NORMALLY mean you have to replace the whole motor”

    just done the 3rd repair without having to replace motor.

    take of motor and housing

    cut the rubber at end of mould-on to plastic housing

    obtain rubber hose from pump-filter off a servis washer

    cut to size

    jubilee onto to both ends. rubber WILL stretch to fit over the housing and left-over rubber on motor housing.

    so far 1 repair has laster well over a year (almost as long as original part) without issue, and another has lasted almost 10 months.

    worth a go as it will only be a recall if you dont do it well enough first time round…

    #319412
    Martin
    Participant

    Re: those nasty w/p pumps which leak from the rubber and…

    Could someone translate that for me please?:con:

    #319413
    EFS
    Participant

    Re: those nasty w/p pumps which leak from the rubber and…

    Martin wrote:Could someone translate that for me please?:con:

    I think this refers to Askoll circulation pumps where the moulded rubber outlet breaks down and leaks.
    Cheaper by far than the replacement pump but these fail for other reasons and you are only delaying the inevitable.

    Steve

    #319414
    gandh1
    Participant

    Re: those nasty w/p pumps which leak from the rubber and…

    of course but i was under the impression the replacement motors also have the same issue

    #319415
    silverbroom
    Participant

    Re: those nasty w/p pumps which leak from the rubber and…

    If this is the Askol pump fitted to Diplomat (Whirlpool) dishwashers then the replacement pump is the proper one that should have been fitted in the first place.

    Have done loads and never any problem and as Steve says it’s only delaying the inevitable.

    silverbroom

    #319416
    gandh1
    Participant

    Re: those nasty w/p pumps which leak from the rubber and…

    thing is some customers baulk when you tell them itll be £120 for a new circ motor + labour then they decline the repair and often wont wanna pay you anyhting cos they wanna get a new machine.

    this just allows you to cover your base and offer an alternative that if they decline the new pump you dont lose out yourself.

    not ideal i know, but hey

    #319417

    Re: those nasty w/p pumps which leak from the rubber and…

    Sometimes get a customer who says, ” I want it fixed but it doesn’t matter if it only lasts a few months because I’m: having the kitchen done / flogging it with the house / going for a ten-year round the world tour next month”….or similar.
    Your solution would be ideal in such situations.
    Self-amalgamating tape’s pretty good too 😀 .
    Mike.

    #319418
    silverbroom
    Participant

    Re: those nasty w/p pumps which leak from the rubber and…

    gandh1 tip is a good one, and as Mike says for a short term fix it’s OK for some.

    So depending on cutomer’s requirements they can now have a choice, as we all know “the customer is always right?”

    silverbroom

    #319419

    Re: those nasty w/p pumps which leak from the rubber and…

    leavemetogetonwithit wrote:” I want it fixed but it doesn’t matter if it only lasts a few months because I’m: having the kitchen done / flogging it with the house / going for a ten-year round the world tour next month”….or similar.

    Mike.
    Could add to that: …..”getting a new government.” :popcorn:
    Mike.

    #319420
    gandh1
    Participant

    Re: those nasty w/p pumps which leak from the rubber and…

    but then the customer wouldnt be totally right. 100 seats left and tories need 58 of them to get a majority according to the beeeeeb

    and yes 2 of our fixes were on people selling the house in at the most the next 12 months. so the servis hose fix were ideal repairs for them who didnt want a £170 repair to last for 2 years 🙂 i kinda felt sorry for htem too as they both seemed to have been beaten down heavily on the sale price of the home too

    #319421
    LJDomestics
    Participant

    Re: those nasty w/p pumps which leak from the rubber and…

    Ive always changed the whole pump to the new style/superseeded.

    #319422
    iadom
    Moderator

    Re: those nasty w/p pumps which leak from the rubber and…

    gandh1 wrote:thing is some customers baulk when you tell them itll be £120 for a new circ motor

    Only £49.12 ex vat from Masterpart. 😉

    #319423
    keithwilliams
    Participant

    Re: those nasty w/p pumps which leak from the rubber and…

    i’ve used the piece of hose repair to keep job price down. however i’ve also changed loads of knackered pumps and each time i keep the impellor housing. i’ve got about six at moment. dare i say it may be delaying the inevitable, but then thats another job.

    #319424
    machineman
    Participant

    Where do you get the new hose from
    or am i missing something
    Dave

    #319425
    gandh1
    Participant

    Re: those nasty w/p pumps which leak from the rubber and…

    there isnt one available macineman, i use the rubber found on the whirlpool/servis w/m’s that links the front filter with the rearmounted pump as its just the right diameter to allow for snug fit

Viewing 15 posts - 1 through 15 (of 19 total)
  • You must be logged in to reply to this topic.