Beko dcrs 68 w ( i think)

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko dcrs 68 w ( i think)

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • May 5, 2010 at 6:48 pm #54410
    Micky 32
    Participant

    Put an element in one today but the dam thing only runs for a few seconds, even on timed section and wet clothes in it. Any ideas?

    May 5, 2010 at 9:16 pm #319503
    Allsorts
    Participant

    Re: Beko dcrs 68 w ( i think)

    What only runs for a few minute… The heater or the machine?

    George

    May 5, 2010 at 9:18 pm #319504
    Micky 32
    Participant

    Re: Beko dcrs 68 w ( i think)

    Sorry i meant the machine. You switch it on press the start it starts and after about 4 or 5 seconds it stops. If you switch machine on and off it repeats.

    May 6, 2010 at 7:00 am #319505
    Allsorts
    Participant

    Re: Beko dcrs 68 w ( i think)

    Check the Neutral track/feed to the door switch and the door switch itself

    George

    May 6, 2010 at 10:14 am #319506
    Galway
    Participant

    Re: Beko dcrs 68 w ( i think)

    open door and take out the sensor at the 6 o clock position and clean .these sometimes get blocked up with fluff.

    May 6, 2010 at 10:20 am #319507
    Micky 32
    Participant

    Re: Beko dcrs 68 w ( i think)

    Thanks for the replies. The fan is a little noisy too it has a little play on it, hardly would cause that? Regarding the sensor it cuts off even on the timed section, thought it wouldn’t use the sensor on that?

    May 6, 2010 at 12:44 pm #319508
    Galway
    Participant

    Re: Beko dcrs 68 w ( i think)

    could be looking a a board problem.
    i know there is a test program for this but i cant put my hands on it .i sure someone will have it and help you out.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.