Zanussi ZWF12070W1 Dead

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZWF12070W1 Dead

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 6, 2010 at 9:12 pm #54439
    Twoten
    Participant

    The above machine is completely dead.

    I have 240V going to the control module but the LED’s wont light and the whole thing is dead.

    Has anyone come across this before? Can it be confirmed as a faulty PCB or have I missed something?

    Keith.

    May 6, 2010 at 9:57 pm #319612
    leavemetogetonwithit
    Participant

    Re: Zanussi ZWF12070W1 Dead

    Well, here’s a couple of similar experiences from my own record:
    ZWF1221
    ZWD1480
    But I’m sure you could find more with a bit of searching.
    Mike.

    May 7, 2010 at 8:28 am #319613
    Twoten
    Participant

    Re: Zanussi ZWF12070W1 Dead

    Thanks Mike,

    My money is on the module and door lock, as the pump seemed to check out OK.

    May 7, 2010 at 10:05 am #319614
    leavemetogetonwithit
    Participant

    Re: Zanussi ZWF12070W1 Dead

    I’m sure I’ve read here somewhere about these dead Electrolux products being caused by user switching off during spin, too. Also lightning damage. So don’t automatically blame door lock. One thing’s for sure, I wouldn’t risk much of my money on a new pcb. Likelihood of it going again is too high.
    Mike.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.