- This topic has 4 replies, 3 voices, and was last updated 15 years, 11 months ago by
.
-
Posts
-
MODEL DI620UK/E intergrated
unit washers ok so far,then program appears to skip to end
no heat evident afer 20 mins operation
element tests out ok
no 2 and no 4 lights flashing after 20mins of operation
thanks
Graham
Re: INDESIT DISHWASHER
I too, have the same problem, it is the same model and integrated as well!
it went through the whole wash cycle and no heat.
First I thought it was the heater was faulty, heater is in good nick, even replaced the heater and no change. Checked the thermostat, appears to be working against a electric kettle and it is showing changes in resistance.
Then I thought it was the float switch and ruled it out as I would know if the float switch is faulty (flooding).
My hunch was the circuit board – what did you find? My mind keep going back to the float switch but logically it can’t have been that. Float switch only costs around £7, I could try it but it would be a waste of my time.
Currently a new circuit board costs around £85, I need to clarify before I go down the route of replacing the board.
Please help!! A very patience aunt is waiting for me to fix her machine. it has been 3 months now. I only charge her for parts and free labour not forgetting the odd brew and cakes!
Re: INDESIT DISHWASHER
these are really bad for faulty pcbs im afraid, if its not the screw-in stat then im afraid 9/10 its the pcb.
Re: INDESIT DISHWASHER
Cheers mate,
I guess my aunt will have to ply me with lots of cakes before I tell her the news.
Is it common to have faulty pcb units on these particular model or is it just across the range of Indesit?
- You must be logged in to reply to this topic.