bosch wts 86516

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › bosch wts 86516

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • May 10, 2010 at 7:59 pm #54518
    funbobby
    Participant

    due to have a look at this, been told after a couple of minutes on a sensor dry it goes down to 1 minute, sounds like a dryness module fault anyone else worked on one of these as not been to many later bosch dryers with this type of fault.

    May 11, 2010 at 12:47 am #319881
    leavemetogetonwithit
    Participant

    Re: bosch wts 86516

    Is there a timed cycle on the machine and if so, does that work?
    Need to check continuity through sensor before blaming module.
    Mike.

    May 11, 2010 at 7:57 am #319882
    funbobby
    Participant

    Re: bosch wts 86516

    yes she said timed mode works.

    May 11, 2010 at 8:28 am #319883
    leavemetogetonwithit
    Participant

    Re: bosch wts 86516

    Have you tried a search?
    Mike.

    May 11, 2010 at 10:02 am #319884
    funbobby
    Participant

    Re: bosch wts 86516

    cant find anything on this model.

    May 11, 2010 at 11:53 pm #319885
    leavemetogetonwithit
    Participant

    Re: bosch wts 86516

    Never mind the model. “Bosch sensor dry” (tick all terms box), select trade tech enq. gets 16 results. Probably some clues there. (Martin seems to know them well :wink:.)
    Mike.

    May 12, 2010 at 7:42 am #319886
    Martin
    Participant

    Re: bosch wts 86516

    funbobby wrote:sounds like a dryness module fault.

    Let’s hope not as they are over 200 quid!!! Best to check out the NTC in the door and its connection with the module first. Plus the usual venting/airflow checks of course. 😉

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.