AEG ARCTIS 2792-4GA(928341004)

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG ARCTIS 2792-4GA(928341004)

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • May 17, 2010 at 3:06 pm #54650
    don1407
    Participant

    I have of these showing F8 evap frozen solid. Does anyone please have a list of fault codes or any info for this machine?

    Also machine has had pcb & sensors changed for F5 fault about a year ago.
    Going back when customer defrosted so any info would be helpful.

    Thanks in advance
    Ian

    May 18, 2010 at 12:56 am #320445
    Penguin45
    Participant

    Re: AEG ARCTIS 2792-4GA(928341004)

    I can send you a general tech document in German, or a specific F8 document in Czech…..

    Chris.

    May 18, 2010 at 7:19 am #320446
    don1407
    Participant

    Re: AEG ARCTIS 2792-4GA(928341004)

    Hi Chris

    That would be great the wife knows a bit of German & maybe can get enough info to point me in right direction, as for the czech one I will try & see if I can pick any info from it. Any info I can get would be helpful.

    Do you know if this was a none UK machine?


    Thanks again
    Ian

    May 18, 2010 at 2:26 pm #320447
    johnboy
    Participant

    Re: AEG ARCTIS 2792-4GA(928341004)

    Defrost heater open circuit

    May 19, 2010 at 9:15 pm #320448
    bigchrisoioi
    Participant

    Re: AEG ARCTIS 2792-4GA(928341004)

    its the ‘blanket’ heater o/c……its a stick on heater underneath the evaporator……..

    May 20, 2010 at 5:29 pm #320449
    don1407
    Participant

    Re: AEG ARCTIS 2792-4GA(928341004)

    Thanks for the reply
    But is it the defrost heater or the stick on drain heater, any clues? as I would like to be armed with a part for return visit & its a chargeable call so both are not an option.

    Thanks again

    Ian

    May 22, 2010 at 5:35 am #320450
    bigchrisoioi
    Participant

    Re: AEG ARCTIS 2792-4GA(928341004)

    as i said above, stick on blanket heater will be the problem

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.