bosch w/m 8 in window

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › bosch w/m 8 in window

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • June 2, 2010 at 11:46 pm #54975
    fids
    Participant

    hi guys i have a boschw/m wf02466gb07 fd8412 no go 8 showing in electronic window please advise

    June 3, 2010 at 7:43 am #321561
    Martin
    Participant

    Re: bosch w/m 8 in window

    Wrong forum again fids…post it in TRADE TECHNICAL

    June 3, 2010 at 8:27 pm #321562
    nomadPaul
    Participant

    There is no 8 error on this Machine as far as i can see. might need to check the display just to make sure

    June 3, 2010 at 9:38 pm #321563
    fids
    Participant

    thanks i ve checked number in led and it is 8 differently

    June 4, 2010 at 1:45 am #321564
    leavemetogetonwithit
    Participant

    Re: bosch w/m 8 in window

    8hour delay start?? Or stuck on 8′ to go???
    Mike.

    June 4, 2010 at 6:27 pm #321565
    fids
    Participant

    yes that makes sense but door does nt lock and 8 in led what do you think

    June 4, 2010 at 6:34 pm #321566
    leavemetogetonwithit
    Participant

    Re: bosch w/m 8 in window

    I imagine it should be poss to download user manual from bsh site. You could then check delay start theory.
    Mike.

    June 5, 2010 at 7:43 am #321567
    Martin
    Participant

    Re: bosch w/m 8 in window

    leavemetogetonwithit wrote:You could then check delay start theory.
    Mike.

    I just did that for you fids and there’s no delay feature on this model according to the user manual. So check everything, megger everything and if no component failure spotted it’s likely the module itself is duff I should think. HTH?

    June 5, 2010 at 8:57 am #321568
    timdowning
    Participant

    Re: bosch w/m 8 in window

    I’ve had this fault, only once mind.

    Armature down to earth & in turn had frazzled the module.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.