- This topic has 8 replies, 3 voices, and was last updated 15 years, 10 months ago by
.
-
Posts
-
hello
i have problems with the above washing machine when you try and use the washing machine it runs for a minute or so then stops click twice the start pause light flashes and then it stopsi have checked the inlet and the out let and they all seem clear
Re: zanussi zwd12270w1 problems
would it even do this on the wash cycle as well as it shouldn’t be using the dryer heat, also do you know where the drier heater is located
thanks
nick
Re: zanussi zwd12270w1 problems
nickw wrote:would it even do this on the wash cycle as well as it shouldn’t be using the dryer heat,
Yes.
also do you know where the drier heater is located
Top of the machine in the aluminium “box” that is fitted to the underside of the cabinet crossbrace. The terminals are at the back of this; the rear section of the machine needs to be removed to access the connections and to remove the drier heater element.
Power off before any inspection, of course. :plug:
A.
Re: zanussi zwd12270w1 problems
is it this bit
http://www.buyspares.co.uk/washing-mach … ref=544423
that sits in the back of this housingRe: zanussi zwd12270w1 problems
You’ll need THIS BIT.
To check, power off, disconect wiring to heater (MAKE A DIAGRAM FIRST!] aand see if the machine now behaves.
Penguin45.
- You must be logged in to reply to this topic.