BOSCH F/F KGV2604GB/04

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › BOSCH F/F KGV2604GB/04

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • June 7, 2010 at 7:30 am #55047
    Dapman
    Participant

    Hi I got a call to this appliance.It will run for about 2 hours when first switched on then it goes off and stays off.I changed the pcb but still have the same problem.It could be a thermistor problem but i dont want to jump to any more wrong conclusions and would need a part number anyway.

    Thanks Dave.

    June 7, 2010 at 10:06 pm #321797
    subs
    Participant

    Re: BOSCH F/F KGV2604GB/04

    Hi, you just have to by pass one of the sensors. Its well documented on here. If you have the 4 wires connected to your board there is a photo of the repair in the “simple pc repairs” sticky at the top of this page. There is a 3 wire version too.

    Subs

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.