Bosch WFL2260UK/12

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WFL2260UK/12

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • June 9, 2010 at 10:48 am #55123
    rocker
    Participant

    The machine switches on (active light) will fill with water drum turns, then soon after the program will jump to (ready) light on. then go dead, door is locked and will not release untill turned off. happens on all programes. can anyone advise please never seen this before. Thanks John

    June 9, 2010 at 11:55 am #321990
    Martin
    Participant

    Re: Bosch WFL2260UK/12

    Megger the heater. 😉

    June 9, 2010 at 3:18 pm #321991
    rocker
    Participant

    Re: Bosch WFL2260UK/12

    Martin, Will do. cheers John

    June 9, 2010 at 4:17 pm #321992
    rocker
    Participant

    Re: Bosch WFL2260UK/12

    have been back to megger heater / motor / pump / no faults foun. ran on drain cycle after a minute started to fill with water in the pre wash drawer.
    is the pcb knacked!!

    June 9, 2010 at 4:37 pm #321993
    timdowning
    Participant

    Re: Bosch WFL2260UK/12

    If water leaking from a hole in the door seal hasn’t damaged the thermistor or corroded the connections then yes the board has had it.

    June 9, 2010 at 4:43 pm #321994
    rocker
    Participant

    Re: Bosch WFL2260UK/12

    Thanks Tim. got to be pcb. john

    June 10, 2010 at 10:13 am #321995
    LJDomestics
    Participant

    Re: Bosch WFL2260UK/12

    check for a very loose connection first.

    simillar thing i had on a dishwasher yesterday.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.