- This topic has 2 replies, 3 voices, and was last updated 15 years, 10 months ago by
.
-
Posts
-
can anyone help me . got a w’pool dishwasher adp962/3 no wash action..m/c fills to level then just sits there…after about 10 secs start lights flahes..checked continuity on motor ok, checked continuity of wiring to motor ok, cant get board tetsted..but looks ok..could black pressure switch cause this prob…any help would be good
Re: whirlpool adp962/3whm
Hi antman
Moved you down to Dishwasher support, more chance of an answer here.
Don
Re: whirlpool adp962/3whm
Antman,
firstly, can you post up the 12nc number…. it will be on the side of the door or on the guarantee card… it starts with an 85.. and is 12 numbers long .
Secondly, look at the flashing light again, and you should notice a slight pause amongst the flashing sequence ; if you can let us know how many flashes each time before the slight pause, this is an error indication code ( if the flashing is continuous and constant with no pause, this is “1” ).
- You must be logged in to reply to this topic.