Zanussi FJDR1466W..E34

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi FJDR1466W..E34

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • June 16, 2010 at 8:07 am #55263
    iadom
    Moderator

    Checked all components for earth leakage, pressure hoses etc all OK.

    Which of the two pressure switches would be most likely to cause this fault assuming that the PCB is sound?

    Jim.

    June 16, 2010 at 2:07 pm #322455
    maltheviking
    Participant

    Re: Zanussi FJDR1466W..E34

    Hi Jim
    Check the PCB for dry joints around the relays 😉

    June 16, 2010 at 3:04 pm #322456
    iadom
    Moderator

    Re: Zanussi FJDR1466W..E34

    Will do.

    June 20, 2010 at 7:43 pm #322457
    maltheviking
    Participant

    Re: Zanussi FJDR1466W..E34

    iadom wrote:Will do.

    How did you come on Jim?

    June 20, 2010 at 9:31 pm #322458
    iadom
    Moderator

    Re: Zanussi FJDR1466W..E34

    Come on, or go on?

    Going back out to the machine in the morning armed with the little black pressure switch ( and my soldering iron ) 😉

    June 21, 2010 at 7:46 am #322459
    maltheviking
    Participant

    Re: Zanussi FJDR1466W..E34

    iadom wrote:Come on, or go on?

    Going back out to the machine in the morning armed with the little black pressure switch ( and my soldering iron ) 😉 Iv’e got one of those pressure switches in my stock and never needed it 😕

    June 21, 2010 at 9:53 am #322460
    helo_75
    Participant

    its never , the analogic switch… its the other one thats stuck on

    June 21, 2010 at 10:29 am #322461
    iadom
    Moderator

    Re: Zanussi FJDR1466W..E34

    Strange, a search for E34 reveals several cases of this fault being cured by changing the anologic switch.

    I do have the other one as well just in case. 😉

    June 21, 2010 at 3:11 pm #322462
    maltheviking
    Participant

    Re: Zanussi FJDR1466W..E34

    Last two E34’s I have had recently were down to dry joints, plus one a couple of years ago 😕

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.