- This topic has 6 replies, 3 voices, and was last updated 15 years, 9 months ago by
.
-
Posts
-
hi again.
ok dishwasher most of the time starts and might even fill up with water but then just stops and 2 and 4 diognostic lights light up
so 0#0# ( # meaning aluminated and 0 off )any ideas what i should check or do ?
type- 10045
model no- dwf 64 sseRe: smeg dishwasher not finishing program
I suspect the reason why you’ve not had a reply yet is that is an unknown error code which means it could be a whole number of things.
By the fault description the first thing to check would be the dispenser solenoid….
Let us know exactly what happens after you press start?
Re: smeg dishwasher not finishing program
well i did wonder if it was the inlet solenoid but it lets water in most of the time and stops aprox 5 mins after stating it !!!
Re: smeg dishwasher not finishing program
As i said before it could be the dispenser solenoid going open circuit, you may need to check the heater for earth leakage, or it could simply be a duff pcb.
Time to get the meter out or click on a link below to see if we have an engineer you?
HTH?
Re: smeg dishwasher not finishing program
does it pump out constantly and then beep beep beep? im suspecting water in the base or a faulty circ pump or o rings are leaking on the air break first thing i would do is take the pinth off and the metal plinth behind that off and have a look with a torch for water make sure you turn the machine off first
Re: smeg dishwasher not finishing program
hi..
no not pumping out contsantly..
ill give what you say a try and update!
- You must be logged in to reply to this topic.