Indesit WIL103uk

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit WIL103uk

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 18, 2010 at 4:25 pm #55328
    RickT
    Participant

    Machine works fine up until the spin. As the motor ramps up to spin, machine aborts with delay light (1) flashing with rapid flashing door light. Heater tested fine. Tighten all connectors to pcb. Tacho reads 134.2 ohms. Any ideas?

    June 19, 2010 at 1:40 pm #323289
    iadom
    Moderator

    Re: Indesit WIL103uk

    Known error codes thread, F08. More than likely the PCB is at fault.

    EMW for test/repair is your best option.

    June 19, 2010 at 1:58 pm #323290
    RickT
    Participant

    Re: Indesit WIL103uk

    Thanks for the reply. Customer has since told me that the machine would occasionally turn on when not in use. So it’s definitely the pcb. Thanks again.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.